Synthesis,Anticancer Activity,Structure-Activity Relationship and Mechanistic Investigations of Falcarindiol Analogues

Forty samples of optically active falcarindiol analogues are synthesized by using the easily available C2 symmetric (R)- and (S)-1,1’-binaphth-2-ol (BINOL) in combination with Ti(OⁱPr)₄, Zn powder and EtI. Their anticancer activities on Hccc-9810, HepG2, MDA-MB-231, Hela, MG-63 and H460 cells are assayed to elucidate their structure-activity relationships. These results showed that the falcarindiol analogue (3R,8S)- 2 i with the terminal double bond has the most potent anti-proliferation effect on Hccc-9810 cells with IC₅₀ value of 0.46 μM. The falcarindiol analogue (3R,8S)- 2 i can induce obvious Hccc-9810 cell apoptosis in a concentration-dependent manner by Hoechst staining and flow cytometry analysis. The proposed mechanism suggests that the falcarindiol analogue (3R,8S)- 2 i increases LDH release and MDA content, and reduces the levels of SOD activity, which lead to the accumulation of oxidative stress and induce apoptosis in Hccc-9810 cells.     

Verification of unified effective stress theory based on the effect of moisture on mechanical properties of fiber reinforced unsaturated soil

The unified effective stress theory based on suction stress (SSCC theory) enables the characterization of soils under both saturated and unsaturated conditions with one closed-form relationship. This study provides experimental verification of this theory through the unconfined compressive strength test (UCS) and indirect tensile test strength (ITS) on silty clay soil stabilized with fiber. A series of matric suction, ITS, and UCS tests were conducted to validate the SSCC theory through the representation of the results of ITS and UCS tests in terms of mean total stress (p) versus deviatoric stress (q) and mean effective stress (p`) versus deviatoric stress (q). The results of the validation procedures showed that the SSCC theory is applicable and valid at a range of 6%–16% of water content on the silty clay and the silty clay fiber-reinforced soils. There is a small fluctuation in the increase of ITS and UCS values with increasing fiber content due to randomly oriented distribution of the fiber. The addition of glass fiber does not significantly affect the capacity of water retention of the soil. It improves the condition of the mechanical soil properties at the end of construction more than of the effective stress condition.     

汽轮机运行调节方式优化策略探析

分析了汽轮机的喷嘴调节、节流调节、旁通调节、定压调节和滑压调节等几种基本调节方式的特点,指出现役燃煤火电机组多因调节方式单一而普遍存在着调峰能力不足、负荷响应迟缓以及因长期偏离设计工况致使运行安全经济性下降等诸多问题,提出了通过调节方式的优化组合,采用(节流)定压-滑压-(喷嘴)定压-旁通调节的复合调节方式,以实现煤电机组安全、经济、灵活、快速地参与电网的深度调峰,破解具有强随机波动性的新能源电量规模化并网的困境。     

The periodic system and the idea of a chemical element: From Mendeleev to superheavy elements

Like other scientific concepts, the idea of a chemical element has changed considerably over time, since it was first established in the Enlightenment era. In Dmitri Mendeleev's construction of the periodic system, he distinguished between simple substances and elements as defined by their atomic weights. The foundation of the periodic system on the latter concept led to several challenges. For example, the system seemed unable to accommodate the radioactive substances eventually recognised as isotopes. Around 1920, elements were consequently redefined in terms of their atomic numbers, a nuclear property that could be determined by X‐ray spectroscopy. Although this understanding of an element has stood the test of time, new questions turned up relating to the concept of an element following the syntheses of transuranic elements since the early 1940s. These syntheses of very heavy elements have additionally led chemists and physicists to reconsider the criteria for the discovery of a new element. Recently, elements have been officially recognised on the sole ground that a small number of very heavy atomic nuclei were identified. The paper discusses how the notion of an element was modified during different periods of time, the reasons for the modifications, and the values ascribed to them in the communities of chemists and physicists.     

Rhombellation: a builder for multi-shell clusters

Rhombellanes are mathematical structures, proposed by us in 2017; they may appear both in periodic crystals or in finite structures. The simplest rhombellane is rbl.5 or K_2.3, the complete bipartite graph. In this paper, rhombellation operation is iteratively applied on three classes of structures: cube, tori and cubic pcu-network, respectively. The structural topological parameters are detailed.     

Stimulation of densification during the reduction of U3O8 to UO2 by atmosphere control

A reduction process in the head-end for pyroprocessing has been adopted to avoid oxidation attack on the molybdenum crucible during sintering. The reduction process is employed to reduce U₃O₈ pellets to UO₂ prior to sintering. This allows elimination of the oxygen source, which causes oxidation attack during sintering, thereby permitting the use of a metallic crucible. However, little densification occurs due to the low reduction temperature limited by the INCONEL crucible. Consequently, the amount of material scraps from the pellets increases, thus creating an additional processing burden due to its high radioactivity. To reduce the amount of scraps, densification should be enhanced. This study suggests a simple atmospheric control strategy and clarifies its effects. With the atmospheric control, a higher bulk density and better attrition resistance were obtained in comparison to without this strategy. This can be explained in terms of O/U ratio dependent diffusion kinetics during the reduction of U₃O₈ to UO₂.     

Controlled Secure Direct Communication Protocol via the Three-Qubit Partially Entangled Set of States

In this paper, we first re-examine the previous protocol of controlled quantum secure direct communication of Zhang et al.’s scheme, which was found insecure under two kinds of attacks, fake entangled particles attack and disentanglement attack. Then, by changing the party of the preparation of cluster states and using unitary operations, we present an improved protocol which can avoid these two kinds of attacks. Moreover, the protocol is proposed using the three-qubit partially entangled set of states. It is more efficient by only using three particles rather than four or even more to transmit one bit secret information. Given our using state is much easier to prepare for multiqubit states and our protocol needs less measurement resource, it makes this protocol more convenient from an applied point of view.     

Stream-Based Data Sampling Mechanism for Process Object

Process object is the instance of process. Vertexes and edges are in the graph of process object. There are different types of the object itself and the associations between object. For the large-scale data, there are many changes reflected. Recently, how to find appropriate real-time data for process object becomes a hot research topic. Data sampling is a kind of finding c hanges o f p rocess o bjects. There i s r equirements f or s ampling to be adaptive to underlying distribution of data stream. In this paper, we have proposed a adaptive data sampling mechanism to find a ppropriate d ata t o m odeling. F irst o f all, we use concept drift to make the partition of the life cycle of process object. Then, entity community detection is proposed to find changes. Finally, we propose stream-based real-time optimization of data sampling. Contributions of this paper are concept drift, community detection, and stream-based real-time computing. Experiments show the effectiveness and feasibility of our proposed adaptive data sampling mechanism for process object.     

Nano-to-macroporous TiO2 (anatase) by cold sintering process

Cold Sintering Process (CSP) was applied on commercial nanopowders to produce nanostructured TiO₂ anatase with nano-to-macro porosity. Nanoporous TiO₂ based materials were obtained by applying CSP at 150 °C and pressures up to 500 MPa on three TiO₂ nanopowders with different specific surface area (s.s.a. = 50, 90 and 370 m²/g), using water as transient aqueous environment. Although TiO₂ is insoluble in water, a density of 68% and s.s.a. = 117 m²/g were achieved from the powder with the highest specific surface area. A post annealing process at 500 °C increased the density up to 73% with a s.s.a. = 59 m²/g, and the crystallites dimensions passed from 110 Å in the powder to 130 Å in CSP material and 172 Å after post annealing. Finally, macroporosity was produced by using thermoplastic polymer beads as sacrificial templates within TiO₂ nanopowder during CSP, followed by a debonding at 500 °C.     

Sintering,microwave properties,and circulator applications of textured Sc-substituted M-type ferrite thick films

Sc³⁺ substituted M-type ferrites are effective microwave magnetic materials with a ferromagnetic resonance frequency in the range of 20 GHz–50 GHz. We report on the fabrication of oriented ferrite thick films as microwave components for application in the K_a-band at 30 GHz. Films of BaFe_11.5.Sc_0.5O₁₉ were prepared by screen-printing on alumina substrates, drying in an external magnetic field, and sintering at 900 °C. Low-temperature sintering is achieved through use of a mixed BBSZ/CuO sintering aid. A strong anisotropy of the sintered ferrite films is revealed by XRD analysis. Microwave properties of the films were determined in a coplanar waveguide setup. The ferromagnetic resonance frequency of the films is at 30 GHz and the textured films possess good nonreciprocal properties which scale with film thickness. The films were tested in a Y-junction circulator, and represent promising materials for self-biased microwave components fabricated in thick film technology.